Canon MF419x User Manual page 234

If the screen above is not displayed
● You can only send to your own e-mail address. To send to other destinations, you must configure the send
function authentication settings so that e-mail transmission is not restricted. Contact your administrator
for details. LDAP Server Authentication(P. 536) .
5
Specify multiple destinations, including Cc/Bcc destinations, as necessary.
● Tap <Destination>, select the method for specifying destinations and then specify the destination.
● If you selected <Specify from LDAP Server> or <Specify Myself as Destination>, the destination is selected in
the <To> field.
● <Cc> and <Bcc> addresses can only be selected using <Specify from Address Book>, <Specify from Coded
Dial>, or <Specify from Favorites>.
6
Specify the scanning settings as necessary.
● Tap the item you want to set.
<Scan Size> Specifying a Scanning Size(P. 349)
<Density> Adjusting Density(P. 353)
<Original Type> Selecting Document Type(P. 355)
<2-Sided Original>
<Sharpness> Adjusting Sharpness(P. 357)
● The file name of a scanned document is automatically assigned based on the following format:
"communication management number (four digits)_sent date and time_document number (three
digits).tif."
Example of file names:
"0045_151017190005_001.tif"
● You cannot specify file names yourself.
7
Specify the subject, body, and reply-to address for the e-mail as necessary.
Faxing
Scanning 2-Sided Documents(P. 356)
To send only a one-page document on October 17, 2015 at 07:00:05 PM.
225