Canon MF419x User Manual page 510

[Server Name]
Enter up to 24 alphanumeric characters for identifying the LDAP server.
[Server Address]
Enter the IP address of the LDAP server or enter up to 47 alphanumeric characters for the host name of the
server (example: ldap.example.com).
[Server Address] and DNS
To prevent errors from occurring when searching for destinations, make sure to check the following:
● If the host name is entered for [Server Address], make sure that a DNS server is available in the
network.
● If the IP address is entered for [Server Address], check whether the DNS server supports only
forward lookup. If the server supports only forward lookup, select [Do Not Use] or [Use] for [Login
Information]. If you select [Use (Security Authentication)], make sure that the DNS server supports
reverse lookup.
[Position to Start Search]
Specify the node in the directory information tree (DIT) that you want to start search from. Leaving the text box
blank sets the machine to start search from an arbitrary node selected automatically.
● Depending on the type of characters used, up to 120 characters can be entered.
● When specifying the node, enter "DC=", followed by a host name (a dot-delimited character string in the
Active Directory domain name), and separate each of the entries with a comma. If the domain name is
"john.example.com", for example, enter "DC=john,DC=example,DC=com."
[Port Number]
Enter the port number used for communicating with the LDAP server.
[Search Timeout]
Specify how long the machine searches. Enter between 30 and 300 seconds.
[Login Information]
Network
501