Selecting Destinations Directly by Entering Coded Dial
Numbers
●
To use coded dial numbers, the destination must be registered in the Address Book beforehand.
Registering Destinations in the Address Book(P. 80)
●
To register shared folders or FTP servers as destinations, you need to perform the registration procedure
from the computer.
Setting a Shared Folder as a Save Location(P. 475)
Registering Destinations in the Address Book from Remote UI(P. 624)
1
Press
and tap <Scan>.
●
When the logon screen appears, use the numeric keys to enter the user name and password. Then select the
authentication server and press
2
Select <Destination>
●
If the <Type> screen appears, select <To>, <Cc>, or <Bcc> as a destination type.
3
Use the numeric keys to enter a three-digit number (001 to 281).
●
If you enter the wrong characters, press
delete all the input characters at once.)
Using the Machine as a Scanner
Three-digit numbers (coded dial numbers) are assigned to addresses in the Address
Book. You can specify an address simply by entering its coded dial number.
.
Logging on to Authorized Send(P. 45)
<Specify from Coded Dial>.
. (Press to delete each character one by one; press and hold to
365
0UWX-068