Canon MF419x User Manual page 759

#751
The FTP server has not been started up or a network connection has been cut.
(Failure to connect to the destination is sometimes caused by a disconnection en route.)
● Check the destination.
● Check the network status.
Viewing Network Settings(P. 445)
The IP address was not set correctly.
● Check <TCP/IP Settings>.
Setting IP Addresses(P. 436)
#752
E-mail sending or I-Fax sending/receiving was impossible because an incorrect SMTP server name was
set.
● Check the SMTP server name, and correct the setting.
Configuring Basic E-Mail Settings(P. 464)
Configuring E-Mail/I-Fax Communication Settings(P. 469)
E-mail sending or I-Fax sending/receiving was impossible because an incorrect domain name was set.
● Check the domain name, and correct the setting.
Configuring DNS(P. 488)
E-mail sending or I-Fax sending/receiving was impossible because the machine was not connected to a
network correctly.
● Check whether the machine is properly installed and correctly connected to the network.
Installation/Settings Problems(P. 758)
#753
Scanned data could not be sent as e-mail, not sent/received as I-Fax, or not stored in the shared
folder/FTP server because the LAN cable is disconnected.
● Check whether the LAN cable is connected correctly.
Connecting to a Wired LAN(P. 418)
#755
Scanned data could not be sent as e-mail or I-Fax nor stored in the shared folder or FTP server because
TCP/IP was not working correctly.
● Check <TCP/IP Settings>, and set correctly.
Network Settings(P. 630)
An IP address is not set.
● Set the IP address correctly.
Troubleshooting
750