Canon MF419x User Manual page 513

[Use]
[Use (Security Authentication)]
[Use System Manager ID]
If [Use] is selected in [Login Information], this specifies whether authentication using the system manager ID is
used. To use the system manager ID, select the check box and specify the user name and password for used for
authentication. If you deselect this check box, login is anonymous (no user name).
[User Name]
Enter the user name of the machine that was registered to the LDAP server in the form "(domain name)\(user
name)" (example: domain1\user1). Depending on the type of characters used, up to 120 characters can be
entered.
[Set/Change Password]
To specify or change the password, select the check box and enter up to 24 characters in the [Password] text
box.
[Domain Name]
When [Use (Security Authentication)] is selected for [Login Information], enter up to 120 alphanumeric
characters for the directory tree name in Active Directory (example: example.com).
6
Click [OK].
LINKS
Specifying Destinations in an LDAP Server(P. 162)
Specifying Destinations in an LDAP Server (E-Mail/I-Fax)(P. 371)
Configuring SNTP(P. 505)
LDAP Server Authentication(P. 536)
Network
Select to authenticate the machine using the System Manager ID.
Select to use data obtained by Kerberos, a network authentication protocol, for the
authentication password. If this setting is selected, the clock of the machine needs to be
synchronized with that of the LDAP server.
504