Canon MF419x User Manual page 879

Weight
TELEPHONE 6 KIT (MF419x / MF416dw)
Copy Card Reader-F1 (MF419x / MF418x)
The card control system simplifies the logon process of Department ID Management by using the control card instead
of entering the department ID. You can log on to the machine by inserting a control card and log off by removing it.
Card slot
Insert the control card into the card slot when the logon screen is displayed. Remove the control card from
the card slot after using the machine. The main screen appears on the display after you log on, and the logon
screen appears on the display after you log off.
Control card
You can use the control card shown below. Make sure that the card is facing in the correct direction when you
insert it into the card slot.
Available Cards
Card Readout Method
Magnetic Card Reading Direction Face up
Store/Replay
Dimensions
Approx. 4.1 kg
This is a handset that can be connected to the machine. Use the handset when you
use the machine as a telephone. Also, use the handset when you send or receive
faxes manually.
Magnetic
Magnetic readout
Replay
88 x 96 x 40 mm (excluding the attachment kit and cable)
Appendix
870