Using Up Toner - Canon MF419x User Manual

Using Up Toner

Symptoms like the following appear on printouts when toner runs low.
Streaks appear
Perform the following procedure when any of the above symptoms appears. They will allow you to use up all of the
toner in the toner cartridge. Performing this procedure may allow you to get fine print again for some time until the
toner is used up. If the symptom does not improve after you perform the following procedure, replace the toner
cartridge ( How to Replace Toner Cartridges(P. 798) ). Before starting the procedure, read the precautions given
in Maintenance and Inspections(P. 9) and
1
Open the front cover while holding down on the button.
2
Remove the toner cartridge.
3
Shake the toner cartridge five or six times as shown below to evenly distribute the
toner inside the cartridge.
Maintenance
Partially faded Uneven density
Consumables(P. 10) .
796
0UWX-0HC