5
Press
.
➠
Copying starts.
●
To cancel copying, tap <Cancel>
When placing documents in the feeder in step 1
The document is automatically scanned.
When placing documents on the platen glass in step 1
Depending on the copy settings you made, the screen for selecting the document size and paper source are
displayed when copying multiple documents. Follow the procedure below.
1
Select the document size.
2
Select the paper source that contains the paper you want to use.
●
If the screen is not displayed, proceed to step 3.
3
Place the next document on the platen glass, and press
●
Repeat this step until you finish scanning the entire document.
4
Tap <Start Copying>.
●
When the <Paper Size & Settings Mismatch> or <The memory is full. Scanning will be canceled. Do you
want to print?> message is shown in the display.
When copying documents with text or images that extend to the edges of the page
●
The edges of the document might not be copied. For more information about the scan margins, see
Area(P. 857) .
●
If you always want to make copies with the same settings:
Copying
<Yes>.
Canceling Copies(P. 111)
.
When an Error Message Appears(P. 734)
Changing Default Settings(P. 131)
108
Scan