Canon MF419x User Manual page 343

2
Tap <Finish>.
➠
The scanned data is saved in the USB memory device.
How the folders to save scanned data and files are named
● When scanning is complete, a folder is automatically created in the USB memory device to save the
scanned data. Folders and files are named as follows.
Folder The "SCAN_00" folder is created and up to 100 files are saved in the folder. The folders
Name "SCAN_01" to "SCAN_99" are then created when the current folder becomes full of 100 files.
File names from "SCAN0000.XXX" to "SCAN9999.XXX" are given to the scanned data files ("XXX"
File is the extension for the file format such as "JPG"). For the first two numerical digits, the same
Name number is allotted as that of the folder number in which the files are saved. For example, The
fifth JPEG file stored in the "SCAN_01" folder is named "SCAN0105.JPG".
7
Tap <Close>.
8
Disconnect the USB memory device from the USB port.
1
Press .
2
Press .
3
Tap <Device Status>.
4
Tap <Remove Memory Media>.
➠
Wait until the message <The memory media can be safely removed.> is displayed.
5
Disconnect the USB memory device.
● If you always want to scan with the same settings:
Using the Machine as a Scanner
Changing Default Settings(P. 131)
334