Canon MF419x User Manual page 431

If an error message is displayed during setup
● Tap <Close> and return to step 5.
8
Check that the Wi-Fi indicator is blinking on the operation panel.
● The Wi-Fi indicator blinks when a wireless router is detected.
➠
When the setup is completed, the screen below is displayed, and approximately 2 seconds later, the Wi-Fi
indicator lights up. Wait approximately 2 minutes (until the automatic settings of IP address and other
items are complete).
Signal strength
● When more than one wireless router is available for connection, the machine connects to the device with
the strongest signal. Signal strength is measured using RSSI (Received Signal Strength Indication).
● You can set the IP address manually.
Reducing power consumption
● You can set the machine to enter <Power Save Mode> based on signals emitted from the wireless router.
Power Save Mode(P. 631)
If the IP address of the machine has changed
● In a DHCP environment, the IP address of the machine may be changed automatically. If this happens, the
connection is maintained as long as the machine and the computer belong to the same subnet.
LINKS
Connecting to a Wireless LAN (P. 419)
Network
Setting IP Addresses(P. 436)
422