Scanning Using An Application - Canon MF419x User Manual

Scanning Using an Application

● The application must be compatible with TWAIN or WIA
for your application.
*
TWAIN is a standard for connecting image input devices, such as scanners, with computers. WIA is a function that is an
integrated standard in Windows.
1
Place the document(s).
● The second or subsequent documents may not be scanned, or an error message may be displayed
depending on the application. In such a case, place and scan one document at a time.
● When <Auto Online for Remote Scan> is set to <Off>, you must tap <Scan>
Home screen to bring the machine online.
2
From the application, select the start scan command.
● The procedure for selecting the start scan command varies depending on the application. For more
information, see the instruction manual for your application.
3
Select the scanner driver for the machine.
● Select ScanGear MF or WIA. If you select ScanGear MF, you can configure advanced scan settings.
4
Configure the scan settings as necessary.
● For more information about ScanGear MF scan settings, see
Mode(P. 314) or
5
Click [Scan].
➠
Scanning of the document starts.
Using the Machine as a Scanner
You can scan documents from applications such as image-processing or word-
processing software. The scanned image is directly loaded in the application,
allowing you to edit or process the image immediately. The following procedure
varies depending on the application.
Placing Documents(P. 47)
Configuring Scan Settings in Advanced Mode(P. 317) .
*
. For more information, see the instruction manual
Auto Online for Remote Scan(P. 712)
Configuring Scan Settings in Simple
311
0UWX-05C
<Remote Scanner> in the