Auto Detect - Canon MF419x User Manual

<Menu>
from Host>
Dedicated Port Settings
Enable or disable the dedicated port. The dedicated port is used when printing, faxing, or scanning uses MF Scan
Utility and when browsing or specifying the machine settings over the network.
Off
On
<Menu>
machine
Waiting Time for Connection at Startup
Specify a wait time for connecting to a network. Select the setting depending on the network environment.
Wait Time for Connecting to a Network(P. 487)
0 to 300 (sec.)
Ethernet Driver Settings
Select the Ethernet type (10BASE-T/100BASE-TX/1000BASE-T) and the communication mode of Ethernet (half-duplex/
full-duplex). You can also view the MAC address for wired LAN.
MAC Address
Check the MAC address of the machine, which is a number unique to each communication device.
the MAC Address for Wired LAN(P. 446)

Auto Detect

Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Configuring Ethernet Settings(P. 484)
Off
Communication Mode
Half Duplex
Full Duplex
Ethernet Type
10BASE-T
100BASE-TX
1000BASE-T
On
Setting Menu List
<Network Settings> <SNMP Settings>
Select <Off> or <On>
<Network Settings> <Dedicated Port Settings>
<Acquire Printer Management Information
Restart the machine
639
Select <Off> or <On> Restart the
Setting a
Viewing