Adjustment/Maintenance - Canon MF419x User Manual

Adjustment/Maintenance

Adjust Copy Image(P. 701)
Display Timing for Cartridge Preparation Notification(P. 701)
Printer Density(P. 701)
Toner Save(P. 702)
Special Processing(P. 702)
Clean Fixing Assembly(P. 706)
Clean Feeder(P. 706)
Adjust Copy Image
Adjust the gradation and density in copies.
Display Timing for Cartridge Preparation Notification
Set the display timing for the message notifying you that the amount remaining in the toner cartridges is low.
Auto
Custom
<Menu>
Notification>
Printer Density
Adjust this if the printed text or thin lines are faded.
Nine Levels
<Menu>
density
Setting Menu List
All the settings about adjustment and maintenance are listed with short
descriptions. Default settings are marked with a dagger ( ).
Adjusting the Gradation and Density for Copy Jobs(P. 804)
<System Management Settings>
<Custom> Enter toner level
<Adjustment/Maintenance>
<Apply>
<Display Timing for Cartridge Preparation
<Apply>
<Printer Density> Tap
701
0UWX-0AW
/ to adjust the toner