Preface; Safety Precautions - Canon IPF8400S Basic Manual

iPF8400S Basic Guide

Preface

Safety Precautions

Safety Precautions ........................................................................................................................................... 2
Legal Notices.................................................................................................................................................... 5
Safety Precautions
Follow the warnings and precautions below to use the printer safely. Do not perform any operations
or procedures other than as described in this manual. Doing so may result in unexpected accidents
and can cause a fire or electrical shocks.
Printer location
• Do not set up the printer in any location exposed to alcohol, thinner, or other volatile liquids. If
these substances come into contact with electrical components inside the printer, there is a risk
Warning
of fire or electrical shock.
• Never install the printer on an unstable or vibrating surface. If it falls over, this could cause
personal injury.
Caution
• Never set up the printer in a location that is exposed to high humidity or large amounts of dust,
or exposed to direct sunlight, high temperature, or open flame. This could cause a fire or
electrical shock. Use the printer location in an environment where temperature and humidity
are within the ranges of 15 °C to 30 °C (59 °F to 86 °F) and 10 to 80% RH (with no
condensation).
• Never place the printer on a heavy wool or shag carpet. The fibers may enter the printer and
cause a fire.
• Keep the area around the power outlet clear of items so that you can disconnect the power
cable immediately if the printer starts operating abnormally. In the event of a printer
malfunction, remove the power cable from the outlet as soon as possible to prevent fire and
electrical shocks.
• Do not install the printer near sources of strong electromagnetic fields, whether equipment that
generates such fields or places where such fields occur. This could damage the printer or
cause malfunction.
2