Holding the Cutter Unit by the Lock Lever (a)
and grip (b), remove it from the Carriage.
• Never touch any part of the Cutter Unit except the Lock Lever (a) and grip (b). This may
• Do not disassemble the Cutter Unit. Touching the blade may cause injury.
• Dispose of the used Cutter Unit in accordance with local regulations.
Holding the new Cutter Unit by the Lock Lever (a) and grip (b), insert it on the Carriage until it
clicks into place (c).
• After installing the Cutter Unit, hold it only by the grip (b) and pull the Cutter Unit forward
stain your hands or cause injury. Additionally, this may damage the printer.
to make sure it does not come off. It may damage the printer if the Cutter Unit comes
iPF8400S Basic Guide