• If any paper has been advanced that will not be used, a message is shown requesting
Open the Top Cover and lift the Ejection Guide.
Holding the Roll Holder so that the side with the
white gear faces the side of the Roll Holder Slot
with a white gear, load the Roll Holder shaft (a)
into the grooves (b) on both ends of the Roll
Holder Slot, fully into the slot.
• Be careful not to drop the roll and hurt yourself when loading it.
• Be careful not to pinch your fingers between the Roll Holder shaft (a) and the guide
you to remove it.
Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go
to the next step.
grooves (b) when loading rolls.
iPF8400S Basic Guide