iPF8400S Basic Guide
Lift the Release Lever and open the Top Cover.
With a sheet lengthwise and printing-side up, insert it between the Platen (a) and the Paper
Retainer (b). Align the edges of the sheet as follows.
1. Align the sheet with the Paper Alignment Line (c) at right.
• If any paper has been advanced that will not be used, a message is shown requesting
you to remove it.
Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go
to the next step.
• Do not touch the Linear Scale (a),
Carriage Shaft (b), or Fixed Blade (c).
This may stain your hands and damage