Download  Print this page

Executing Menu Commands; Paper Menu - Canon IPF8400S Basic Manual

Large format printer.
Hide thumbs


Table of Contents
iPF8400S Basic Guide
Press the ▲ or ▼ button to enter the value.
Repeat steps 1 and 2 to complete the settings, and then press the OK button.

Executing menu commands

Menu commands can be executed as follows.
Press ▲ or ▼ to select the action to execute, and then press the OK button.
The menu command is now executed.
Menu Structure
The menu structure is shown categorized by tab. The * on the right side of an item indicates the
default value.
The printer menu is classified into regular menu items available when no print job is in progress and
menu during printing items only available while printing is in progress. see "Printer Menu Operations."
➔User's Guide
Regular menu
"Paper Menu"➔P.64
"Ink Menu"➔P.65
"Job Menu"➔P.65
"Set./Adj. Menu"➔P.66
*1: Only displayed in the menu during printing. Not displayed in the regular menu.
For instructions on menu operations, see "Menu Operations."➔P.61
For details on menu items, see "Menu Settings."➔User's Guide

Paper Menu

The Paper Menu is not displayed during printing.
First Level
Load Paper
Eject Paper
Chg. Paper Type (*1)
Chg. Paper Size
• Hold down ▲ or ▼ to increase or decrease the value continuously.
• If a confirmation message is displayed regarding the setting you entered, press the OK
button. The setting is applied, and the printer is now in Standby.
Not displayed
The same "Ink Menu"➔P.65 as normal is displayed.
The same "Job Menu"➔P.65 as normal is displayed.
A limited "Set./Adj. Menu"➔P.66 containing the following items is displayed.
Adj. Fine Feed(*1)
Printer Info
Second Level
▶ Roll Paper ┋ Cut Sheet
▶ Roll Paper
▶ (The paper type is displayed here.) (*1)
▶ Cut Sheet
▶ (The paper type is displayed here.) (*1)
▶ Sheet Size
▶ (The size of paper is displayed here.) (*2)
▶ CustomPaperSize
Menu during printing
Third Level
Fourth Level
▶ (Set the length and width)
Fifth Level


Table of Contents

   Also See for Canon IPF8400S

Comments to this Manuals

Symbols: 0
Latest comments: