Download  Print this page

The Back Side Of The Paper Is Dirty; Immediately After Borderless Printing, The Trailing Edge Margin Is Soiled During Regular Printing; Printed Colors Are Inaccurate - Canon IPF8400S Basic Manual

Large format printer.
Hide thumbs

Advertisement

Table of Contents
iPF8400S Basic Guide
Cause

The back side of the paper is dirty

The Platen has become dirty after borderless printing or
printing on small paper.
The Platen has become soiled because you have set Width
Detection to Off in the Control Panel menu.
The Platen suction is too strong.
BordlessOversize is set to Standard in the Control Panel
menu.
Immediately after borderless printing, the trailing edge margin is soiled during
regular printing
Depending on your printing environment, after borderless
printing in which the leading and trailing edge of the roll is
cut automatically, any ink adhering to the cutter unit may
rub off on the next printed document.

Printed colors are inaccurate

Cause
Color adjustment has not been activated in the
Advanced Settings of the printer driver.
Colors have not been adjusted on the
116
touch the Output Tray.
In this case, in the Control Panel menu, complete the settings for Dry time and Area in
Scan Wait Time.
However, note that printing will now take longer.
(See "Menu Settings.")➔User's Guide
Cause
Cause
In the Advanced Settings of the printer driver, access Color Settings
in Color Mode to adjust colors.
(See "Main Sheet.")➔User's Guide
(See "Main Pane.")➔User's Guide
Refer to the computer and monitor documentation to adjust the colors.
Corrective Action
Corrective Action
Open the Top Cover and clean the Platen.
(See "Cleaning Inside the Top Cover.")➔P.56
In the Control Panel menu, set CarriageScanWdth to
Fixed.
(See "Menu Settings.")➔User's Guide
Set Width Detection to On in the Control Panel menu, and
then open the Top Cover and clean the Platen.
(See "Cleaning Inside the Top Cover.")➔P.56
Open the Top Cover and clean the Platen. After this,
manually advance the roll onto the Platen before printing.
(See "Cleaning Inside the Top Cover.")➔P.56
(See "Feeding Roll Paper Manually.")➔User's Guide
In the Control Panel menu, reduce the level of
VacuumStrngth.
(See "Adjusting the Vacuum Strength.")➔User's Guide
Set BordlessOversize to Little in the Control Panel menu.
(See "Menu Settings.")➔User's Guide
Corrective Action
Follow these steps to change the Between Pages setting
of Drying Time to a value between about 30 seconds and 3
minutes before trying borderless printing again.
1. On the Main sheet of the printer driver, click Advanced
Settings by Media Type.
2. Select an ink drying time in the list for the Between
Pages setting of Drying Time.
Corrective Action

Advertisement

Table of Contents

   Also See for Canon IPF8400S

Comments to this Manuals

Symbols: 0
Latest comments: