Download  Print this page

The Paper Is Too Small - Canon IPF8400S Basic Manual

Large format printer.
Hide thumbs

Advertisement

Table of Contents
iPF8400S Basic Guide
Cause
You tried to print a test pattern for printer
adjustment on several sheets, but sheets of
different types of paper were used.
When Detect Mismatch in the Control Panel
menu is set to Warning, the type of paper
loaded does not match the type specified in the
printer driver.

The paper is too small.

Cause
When Detect Mismatch in the Control Panel
menu is set to Pause or Hold Job, paper
smaller than the size specified in the printer
driver is loaded.
When Detect Mismatch in the Control Panel
menu is set to Warning, paper smaller than
the size specified in the printer driver is loaded.
134
in the printer driver.
1. Press ▲ or ▼ to select Change Paper, and then press the OK
button.
2. Replace the loaded paper with paper of the type and size you have
specified in the printer driver.
(See "Loading and Printing on Rolls.")➔User's Guide
(See "Loading and Printing on Sheets.")➔User's Guide
Press ▲ or ▼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the
printing quality.
When printing a test pattern for adjustment, use sheets of the same type
of paper, in the required quantity. Replace the paper as follows and
perform adjustment again.
1. Lift the Release Lever and stop printing.
2. Replace the paper.
(See "Loading and Printing on Sheets.")➔User's Guide
3. Execute adjustment again from the control panel menu.
You can continue to print, but note that this error may cause problems in
the printing results.
Press ▲ or ▼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the
printing quality.
Adjust the paper size setting in the printer driver to match the size
loaded in the printer as follows.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK
button.
2. Change the paper size setting in the printer driver to the size loaded
in the printer and try printing again.
Replace the loaded paper with paper of a size that matches the size
setting in the printer driver as follows.
1. Press ▲ or ▼ to select Change Paper, and then press the OK
button to stop printing.
2. Replace the loaded paper to match the settings in the printer driver
and try printing again.
(See "Loading and Printing on Rolls.")➔User's Guide
(See "Loading and Printing on Sheets.")➔User's Guide
You can continue to print, but note that this error may cause problems in
the printing results.
Corrective Action
Corrective Action

Advertisement

Table of Contents

   Also See for Canon IPF8400S

Comments to this Manuals

Symbols: 0
Latest comments: