Preface - Canon SORTER S-82 Service Manual

I. PREFACE
This chapter describes the disassembly and reassembly procedures of the sorter.
The service technician is to identify the cause of malfunction according to "Chapter 4
Troubleshooting" and to replace the defective part(s) following the disassembly procedure of each
part.
Note the following precautions when working on the sorter.
1. CAUTION: Before servicing the sorter, disconnect its power cord from the electrical outlet.
2. Assembly is the reverse of disassembly unless otherwise specified.
3. Note the lengths, diameters, and locations of screws as you remove them. When reassem-
bling the sorter, be sure to use them in their original locations.
4. Do not operate the sorter with any parts removed.
5. Discharge electrical static from your body by touching the metal frame of the sorter prior to
handling the PCB in order to avoid causing damage by the difference in static charge at that
time.
6. Note that the sorter may move during disassembly/reassembly as the casters have no stop-
pers.
CHAPTER 3
3 - 1