Cutter Unit - Canon IPF8400S Basic Manual

Cutter Unit

Cutter Unit ...................................................................................................................................................... 45
Replacing the Cutter Unit ............................................................................................................................... 45
Cutter Unit
When purchasing, check the Model number.
• For instructions on Cutter Unit replacement, see "Replacing the Cutter Unit."➔P.45
Note
Replacing the Cutter Unit
Compatible Cutter Units
For information on compatible cutter units, see "Cutter Unit."➔P.45
Access the menu for cutter unit replacement
1
On the Tab Selection screen of the Control
Panel, press ◀ or ▶ to select the Settings/Adj.
tab ( ).
• If the Tab Selection screen is not displayed, press the Menu button.
Note
2 Press the OK button.
The Set./Adj. Menu is displayed.
Press ▲ or ▼ to select Maintenance, and then press the OK button.
3
Press ▲ or ▼ to select Change Cutter, and then press the OK button.
4
The Carriage moves. When it finishes moving, instructions are displayed on the Display Screen.
Shape Model number
CT-06
iPF8400S Basic Guide
45