• "Loading Rolls in the Printer"➔P.14
• "Loading Sheets in the Printer"➔P.21
• Always make sure the loaded paper matches the type of paper specified in the settings.
On the Tab Selection screen of the Control
Panel, press ◀ or ▶ to select the Settings/Adj.
• If the Tab Selection screen is not displayed, press the Menu button.
Press the OK button.
The Set./Adj. Menu is displayed.
Press ▲ or ▼ to select Adjust Printer, and then press the OK button.
Press ▲ or ▼ to select Feed Priority, and then press the OK button.
Press ▲ or ▼ to select Adj. Quality, and then press the OK button.
Press ▲ or ▼ to select Auto(GenuinePpr) or Auto(OtherPaper), and then press the OK button.
A test pattern is printed for adjustment.
Adjustment is now finished if you have printed on a roll or a sheet of A2 size or larger.
If you are printing on sheets smaller than A2 size for Auto(OtherPaper), a confirmation message
is shown on the Display Screen requesting you to continue printing.
Press the OK button and follow the instructions on the Display Screen.
Adjustment cannot be completed correctly unless the loaded paper matches the
iPF8400S Basic Guide