iPF8400S Basic Guide
Remove the Stand by reversing the installation procedure, when it was attached to the printer.
Disassemble and repackage the Stand by following the installation procedure in reverse.
Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package
them in a shipping box.
Reinstalling the Printer
The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.
Assemble the stand
Referring to the Printer Stand Setup Guide,
assemble the Stand.
Install the printer
Mount the printer on the assembled Stand and
tighten the screws firmly.
• The Stand must be assembled by at least two people on a flat surface. Attempting
assembly by yourself poses a risk of injury or bending the Stand.
• When assembling the Stand, lock the casters. In addition, always unlock the casters
before moving the assembled Stand. Attempting to move the stand when the casters
are locked poses a risk of injury or damage to the location site.