Paper Is Not Cut; The Media Take-Up Unit Continues Rotating - Canon IPF8400S Basic Manual

iPF8400S Basic Guide
Cause
position.
Paper rises by the ends of the cut
position before it is cut.
You are using paper that cannot be cut
with the Cutter Unit.
The Cutter Unit is not installed correctly.
The Cutter Unit blade is worn out.
Cut Speed is not configured correctly in
the Control Panel menu.
During cutting, printed documents fall
out at an angle.

Paper is not cut

In the printer driver, No or Print Cut Guideline is specified
in Automatic Cutting.
In the Control Panel menu, Cutting Mode is set to Eject or
Manual.
The Cutter Unit is not installed.
Rolls are not cut when you are using the Media Take-up
Unit.

The media take-up unit continues rotating

There is a foreign object in the path of the Media Take-up
Sensor (indicated by a dotted line).
108
Reload the paper correctly.
Specify Manual in Cutting Mode in the Control Panel menu and use scissors
or a cutting tool to cut the roll after printing.
(See "Specifying the Cutting Method for Rolls.")➔User's Guide
Reinstall the Cutter Unit correctly.
(See "Replacing the Cutter Unit.")➔P.45
Replace the Cutter Unit.
(See "Replacing the Cutter Unit.")➔P.45
Change the Cut Speed setting in the Control Panel menu.
(See "Menu Structure.")➔P.64
In the Control Panel menu, set Cutting Mode to Eject. Hold documents after
printing, as they are cut.
(See "Specifying the Cutting Method for Rolls.")➔User's Guide
Cause
Cause
Corrective Action
Corrective Action
Specify Yes in Automatic Cutting in the printer driver.
(See "Page Setup Sheet.")➔User's Guide
(See "Paper Detailed Settings Dialog Box.")➔User's
Guide
If the Cutting Mode is Eject, press the Cut button to cut
the paper.
If the Cutting Mode is Manual, cut rolls with scissors or the
like.
(See "Specifying the Cutting Method for Rolls.")➔User's
Guide
Install the Cutter Unit.
(See "Replacing the Cutter Unit.")➔P.45
Either cut the roll paper by pressing the Cut button or lift the
Release Lever and cut the roll with scissors.
(See "Removing Printed Documents from the Media
Take-up Unit (Optional).")➔User's Guide
Corrective Action
Remove the foreign object from the Media Take-up Sensor
path. Arrange the Basket Cloth and Basket Rod so they do
not interfere with the Media Take-up Sensor.