CHAPTER 2 ORIGINAL EXPOSURE SYSTEM
8.2 Removing the Inverter PCB
1) Remove the right upper cover and the
right upper cover base.
2) Remove the reader controller PCB.
3) Disconnect the two connectors from the
inverter PCB [1].
4) Remove the three screws [3], and de-
tach the stopper [4]; then, pull out the
inverter unit [5].
5) Remove the two screws [7], and discon-
nect the connector [7]; then, detach the
inverter PCB [8].
2-28 R
COPYRIGHT © 2000 CANON INC.
[1]
[2]
F02-802-01
[5]
[4]
F02-802-02
[7]
F02-802-03
2000 2000 2000 2000
CANON iR5000/iR6000 REV.0 JULY 2000
[2]
[3]
[8]
[6]