CHAPTER 7 EXTERNALS AND CONTROLS
5.7 Motor
5.7.1 Vertical Path Lower Motor (M27)
1) Remove the right lower cover/rear lower
cover.
2) Remove the waste toner box.
3) Remove the four screws [1], and dis-
connect the connector; then, detach the
vertical path lower motor [2].
5.7.2 Main Motor (M2)
1) Remove the main controller box.
2) Remove the right rear lower cover.
3) Remove the three screws [1], and re-
lease the two clamps [2]; then, remove
the main power switch base [3] out of
the way.
4) Remove the three screws [4], and dis-
connect the connector [5]; then, detach
the main motor [6].
7-36 P
COPYRIGHT © 2000 CANON INC.
[1]
F07-507-01
[1]
[3]
[1]
F07-507-02
[4]
[4]
F07-507-03
2000 2000 2000 2000
CANON iR5000/iR6000 REV.0 JULY 2000
[2]
[1]
[2]
[6]
[5]