Adjusting The Height Of The Charging Wire - Canon iR5000 Service Manual

7.8.5 Adjusting the Height of the Charging Wire

Charging assembly
Primary
Pre-transfer
Transfer
Separation
16.0±0.5mm
The height (position) of the pri-
mary charging wire and the
REF.
transfer charging wire may be
adjusted by turning the screw
found at the back of the charg-
ing assembly; a single turn
changes the position of the
charging wire by about 0.7 mm.
COPYRIGHT © 2000 CANON INC.
Height of charging wire
7.5 +1.5
- 0 mm
10.06±0.3 mm
14.9±0.5mm
2000 2000 2000 2000
CHAPTER 4 IMAGE FORMATION SYSTEM
7.5 +1.5
- 0 mm
9.5±0.5mm
T-04-708-01
CANON iR5000/iR6000 REV.0 JULY 2000
Tolerance
±1mm
A
No height adjusting
mechanism
B
±2mm
C
±2mm
D
4-71 P