Installing The Machine - Canon iR5000 Service Manual

2.15 Installing the Machine

Step
1 Remove the two screws, and detach
the cover from the right rear bottom
of the machine; then, store the fol-
lowing parts:
1. drum protection sheet; keep it
near the waste toner case.
2. drum rotating tool; put it together
with the waste toner case cap and
store it in the grip found at the
top of the waste toner case.
3. grip; store it in the grip recess.
Do not roll the drum protec-
tion sheet.
2 Mount the cover to the right rear bottom.
3 Fit the covers to the grip assemblies.
4 If installation of an accessory (sort, etc.) is planned, install it according to the Instal-
lation Procedure that comes with the accessory.
5 Clean up the area around the machine.
6 Move the machine to the site of installation and correct it so that it is level using the
two adjusters.
7 Fill out the Service Sheet.
COPYRIGHT © 2000 CANON INC.
Work
2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
CHAPTER 3 INSTALLATION
Checks/remarks
Grip recess
Waste toner case
Drum tool
Drum protection
sheet
3-21 S