Removing The Vertical Path Roller 3/4 - Canon iR5000 Service Manual

3) Disconnect the connector [3], and re-
move the screw [4]; then, detach the
guide plate [5].
4) Remove the E-ring [6] from the front of
the roller shaft, and move the bearing
[7] toward the inside; then, detach the
vertical path roller 2 [8].

9.3.3 Removing the Vertical Path Roller 3/4

1) Remove the cassette pickup assembly.
2) Remove the following from the front:
E-ring [1], 1 pc.
spacer [2], 1 pc.
bearing [3], 1 pc.
3) Remove the following from the rear:
E-ring [3], 3 pc.
bushing [4], 2 pc.
roller mount [5]
blue gear [6]
parallel pin [7]
4) Remove the vertical path roller 2/3 [8].
COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
CHAPTER 5 PICK UP/FEEDING SYSTEM
[3]
F05-903-04
[6]
[7]
F05-903-05
[6]
[3]
[4]
F05-903-06
[4]
[5]
[8]
[7]
[4]
[2]
[3]
[1]
[5]
[8]
5-65 P