Removing The Tray Drive Unit - Canon iR5000 Service Manual

CHAPTER 9 SHIFT TRAY

6.2 Removing the Tray Drive Unit

1) Perform steps 1) through 6) to detach
the shift tray driver PCB.
2) Remove the two screws [15], and dis-
connect the connector [16]; then, detach
the tray drive unit [17].
Points to Note When Mounting
Be sure to adjust the position of
the limit sensor (front, rear; see
5.1 "Adjusting the Limit sensor
Position.")
9-12 P
COPYRIGHT © 2000 CANON INC.
[15]
[17]
F09-602-01
2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
[16]