Canon iR5000 Service Manual page 532

5) Remove the four screws [7] from the
back of the shift tray, and remove the
four shaft retainers [8]; then, detach the
tray drive assembly [9].
6) Pull off the shaft [10] from the tray
drive assembly, and remove the three
screws [11]; then, detach the shielding
cover [12].
7) Remove the four screws [13], and de-
tach the shift tray driver PCB [14].
Points to Note When Mounting
Be sure to adjust the position of
the limit sensor (front, rear; see
5.1 "Adjusting the Limit sensor
Position.")
COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
CHAPTER 9 SHIFT TRAY
[7]
[8]
[9]
F09-601-03
[11]
[12]
F09-601-04
[13]
[14]
F09-601-05
[8]
[10]
9-11 P