Removing The Hp Sensor - Canon iR5000 Service Manual

7.2 Removing the HP Sensor

1) Remove the ADF unit from the reader
unit.
2) Remove the reader rear cover.
3) Remove the screw [1], and detach the
ADF base (left) [2].
4) Remove the three screws [3], and detach
the fuse base [4].
5) Remove the screw [5], and detach the
sensor base [7]; then, disconnect the
connector [8], and detach the HP sensor
[8] from the base.
COPYRIGHT © 2000 CANON INC.
CHAPTER 2 ORIGINAL EXPOSURE SYSTEM
2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
[2]
[1]
[3]
[4]
F02-702-01
[7]
[8] [6]
F02-702-02
[5]
2-25 R