The Print Has Fixing Faults - Canon iR5000 Service Manual

CHAPTER 4 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS

3.14 The print has fixing faults

Copy paper
1) Is the paper of a type that has poor fixing performance (e.g., thick pa-
per)?
YES: Set '2' (thick paper mode) in service mode:
Perform the following, and advise the user:
a.
b.
2) Is the paper of a recommended type?
NO:
Fixing assembly
3) Does the problem occur vertically?
YES: Check the fixing roller for scratches and dirt.
NO:
4-14 T
COPIER>OPTION>BODY>FSPD-S.
Set the source of paper (cassette, deck) to 'Heavy'.
Additional Function>common settings>store paper type>source of
paper>'Heavy'
Advise the user to always use the selected source of paper (after
depositing thick paper) whenever using thick paper.
Try using recommended paper. If the results are good, advise the
user to use recommended paper.
Check the fixing roller for nip.
CANON iR5000/iR6000 REV.0 JULY 2000 2000 2000 2000 2000COPYRIGHT © 2000 CANON INC.