Canon iR5000 Service Manual page 774

TR-SP-C3
Use it to switch the transfer/separation output level when the cassette 3 is
used as the source of paper to prevent various problems.
Settings 0: normal (default), 1: to prevent re-transfer
2; to prevent separation fault, 3: to prevent transfer fault
TR-SP-C4
Use it to switch the transfer/separation output level when the cassette 4 is
used as the source of paper to prevent various problems.
Settings 0: normal (default), 1: to prevent re-transfer
2: to prevent separation fault, 3: to prevent transfer fault
TR-SP-MF
Use it to prevent the transfer/separation output level when the manual feed
tray is used to prevent various problems.
Settings 0: normal (default), 1: to prevent re-transfer
2: to prevent separation fault, 3: to prevent transfer fault
TR-SP-DK
Use it to switch the transfer/separation output level when the paper deck is
used as the source of paper to prevent various problems.
Settings 0: normal (default), 1: to prevent re-transfer
2: to prevent separation fault, 3: to prevent transfer fault
TPR-DECL
Use it to switch the delivery path to improve stacking performance in re-
verse delivering thick paper.
Settings 0: normal (default), 1: move paper over reversing roller, and reverse/
delivery after removing curl
DF_BLINE
Use it to turn on/off reduce mode (turning off edge emphasis) for black
lines in stream reading mode.
Caution Turning on the mode will make black lines less noticeable, but the edges of
images will accordingly be less sharp
Settings 0: OFF (default), 1: ON
USER
Making User-Related Settings
COPY-LIM
Use it to change the upper limit for setting a copy count.
Settings 1 to 999 (default: 999)
COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
CHAPTER 5 SERVICE MODE
COPIER>OPTION
5-81 T