Canon iR5000 Service Manual page 509

CHAPTER 8 PAPER DECK
4) Remove the front cover of the deck.
(See p. 8-20P.)
5) Remove the four screws [3], and detach
the roll support plate [4].
6) Remove the coupling shaft [5] and the
E-ring [6], and detach the pulley cover
[7].
7) Remove the two screws [8], and remove
the cable fixing plate [9] on the left;
then, detach the lifter cable [10].
8) Remove the two screws [11] and the
cable fixing plate [12] on the right;
then, detach the lifter cable [13].
9) If you are removing the lifter cable [13]
found inside from the pulley [14] also
found inside, remove the two set screws
[16] of the pulley [15] found on the out-
side, and detach the pulley [15] also
found on the outside.
8-34 P
COPYRIGHT © 2000 CANON INC.
[4]
F08-303-07
[16] [10] [13]
[8] [9] [14][15]
F08-303-08
2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
[3]
[12][11]
[7]
[6]
[5]