Quick Setup Wizard (Fax Setup); Fax Setup Items - Kyocera Triumph-Adler 357ci Operation Manual

Before Using the Fax Machine > Quick Setup Wizard (Fax Setup)

Quick Setup Wizard (Fax Setup)

In quick setup mode, a wizard is used to configure the following settings. Be sure to complete the settings before using
the fax system.

Fax setup items

Step
1.Dialing/RX Mode Dialing Mode
Reception Mode
Auto (DRD)
2.Local Fax Info. Local FAX Name
Local FAX Number
Local FAX ID
TTI
3.Sound Speaker Volume
Monitor Volume
Job Finish Buzzer
4.Rings Normal
Answering Machine
FAX/TEL Switch
5.Redial Retry Times
NOTE
The settings can be changed in the system menu.
Default fax settings (page 8-2)
Setting item
Select the dialing mode according to the line type.
Select the reception mode.
Select the reception pattern.
Register the local fax name printed on the fax on the receiving
system.
Enter the local fax number to be printed on the fax on the
receiving system.
Enter the local fax ID. The local fax ID can limit other parties
with which you can communicate. Enter the four-digit local
FAX ID number.
Select whether or not to print the local fax information on the
fax on the receiving system.
Set the volume when selecting [On Hook].
Speaker Volume: Volume of the built-in speaker when the line
is connected by selecting [On Hook].
Set the monitor volume.
Monitor Volume: Volume of the built-in speaker when the line is
connected without selecting [On Hook] such as in memory
transmission.
Emit a sound when a print job is normally completed.
Set number of times to let phone ring before answering a call.
Set number of times to let phone ring before taking over from
the answering machine.
Set number of times to let phone ring before switching the FAX
and the phone.
Set the number of redials.
Description
2-7
Reference
Page
8-8
8-9
8-9
8-7
8-7
8-7
8-7
8-5
8-5
8-5
8-9
8-9
8-9
8-8