Configuring the switch using EDM
11. Click Apply.
Example
Configuring remote access using EDM
Use this procedure to configure remote access for a switch.
Procedure
1. In the navigation tree, double-click Administration.
2. In the Administration tree, click Remote Access.
3. In the work area, click the Setting tab.
4. In the Telnet Remote Access Setting section, select a value from the Access list.
5. In the Telnet Remote Access Setting section, select a value from the Use List list.
6. In the SNMP Remote Access Setting section, select a value from the Access list.
7. In the SNMP Remote Access Setting section, select a value from the Use List
8. In the Web Page Remote Access Setting section, select a value from the Use List
9. In the SSH Remote Access Setting section, select a value from the Access list.
10. In the SSH Remote Access Setting section, select a value from the Use List list.
96
Getting Started
list.
list.
Comments? infodev@avaya.com
March 2013