Getting started fundamentals
Variable definitions
The following table describes the parameters for the asset-id command.
unit <1–8>
WORD
no
default
24
Getting Started
Variable
Comments? infodev@avaya.com
Value
Configures the Asset ID of a specific unit.
Enter unit number 1–8.
Specifies the Asset ID which corresponds to
your asset tracking system. Enter an
alphanumeric Asset ID of up to 32
characters.
Removes the Asset ID of a specific unit.
Enter a unit number 1–8.
Returns the Asset ID of a specific unit to the
default value. Enter a unit number 1–8.
March 2013