Changing Switch Software Using Edm - Avaya 3500 series Getting Started

Configuring the switch using EDM
Custom Banner tab field descriptions
The following table describes the fields on the Custom Banner tab.
Name
Type
Id
Line

Changing switch software using EDM

Use this procedure to change the software version running on the switch.
Procedure
1. In the navigation tree, click Edit.
2. In the Edit tree, click File System.
3. On the work area, click the Config/Image/Diag file tab.
4. In the TftpServerInetAddressType section, click a radio button.
5. In the TftpServerInetAddress dialog box, type the TFTP server IP address.
6. In the BinaryConfigFileName dialog box, type the name of the binary configuration
7. In the ImageFileName dialog box, type the name of the current image file.
8. In the FwFileName(Diagnostics) dialog box, type the name of the current
9. In the Action section, click a radio button.
10. On the toolbar, click Apply.
104 Getting Started
file.
diagnostic file.
Comments? infodev@avaya.com
Description
Indicates whether the banner type is for a
standalone (switch ) or a stack (stack). Stack
is not available for Release 5.0
Indicates the line of text within a custom
banner.
Specifies the banner character string. The
custom banner is 19 lines high and can be up
to 80 characters long.
March 2013