Avaya 3500 series Getting Started page 66

Configuring a TFTP server
Procedure
1. Log on to ACLI in Global Configuration command mode.
2. At the command prompt, enter the following command:
Variable definitions
The following table describes the parameters for the tftp-server command.
<A.B.C.D>
no
default
66 Getting Started
[no] [default] tftp-server <A.B.C.D>
Variable
Comments? infodev@avaya.com
Value
Specifies the dotted-decimal IP address of
the server you want to use for TFTP services
in the format XXX.XXX.XXX.XXX.
Clears the TFTP server IP address to
0.0.0.0.
Sets the TFTP server IP address to 0.0.0.0.
March 2013