Customizing The Opening Acli Banner - Avaya 3500 series Getting Started

Procedure
1. Log on to ACLI in Global Configuration command mode.
2. At the command prompt, enter the following command:
Variable definitions
The following table describes the parameters for the show banner command.
static
custom
(if empty)

Customizing the opening ACLI banner

Specifies the banner displayed at startup; either static or custom.
Procedure
1. Log on to ACLI in Global Configuration command mode.
2. At the command prompt, enter the following command:
Variable definitions
The following table describes the parameters for the banner command.
static
custom
disabled
<1–19> LINE
Getting Started
show banner [custom | static]
Variable
[no] banner [custom | static | disabled | <1–19> LINE ]
Variable
Customizing the opening banner
Value
Displays default banner
Displays custom banner
Displays static, custom or disabled status if
parameter is not entered
Value
Displays the default agent-banner
Displays the custom agent-banner
Skips the agent-banner display
Fills the Nth line of the custom banner
(1<N<19) with the text specified in LINE
March 2013 51