Avaya 3500 series Getting Started page 119

switch has been designed to operate at internal temperatures above 60°C. When the switch
is operating in Fanless mode, diagnostic fan tests are not performed.
In Normal mode, the fan operates normally and is activated when the temperature reaches its
threshold. See
is not limited; a maximum of 170 Watts is available.
Use this procedure to set the PoE power mode.
Procedure
1. In the navigation tree, double-click Power Management .
2. Click PoE.
3. In the work area, click the Power Mode tab.
4. Perform one of the following:
5. On the toolbar, click Apply.
Power Mode tab field descriptions
The following table describes the fields on Power Mode tab.
Name
PoEPowerMode
Getting Started
Managing switch PoE using EDM
• To enable Low Power Mode and disable fan operation, select the
lowPowerBudget checkbox.
OR
• To enable High Power Mode and enable fan operation, select the
highPowerBudget checkbox.
Configuring PoE power mode using EDM
on page 115. In Normal mode, the PoE budget
Description
Lets you set the power mode for switch to be
either:
• lowPowerBudget: Sets the switch PoE
budget to 60W max and disables fan
operation (Fanless mode).
• highPowerBudget: Sets the switch PoE
budget to 170W max and enables fan
operation (Normal mode).
DEFAULT: highPowerBudget (Normal mode)
March 2013 119