Enabling Or Disabling Poe Traps; Displaying Poe Configuration; Displaying The Current Poe Configuration - Avaya 3500 series Getting Started

Enabling or disabling PoE traps

Enable or disable the traps for the PoE functions on the Ethernet Routing Switch 3500–PWR
+.
Procedure
1. Log on to ACLI in Global Configuration command mode.
2. At the command prompt, enter the following command:
Variable definitions
The following table describes the parameters for the snmp-server notification-
control command.
pethPsePortOnOffNotification |
pethMainPowerUsageOnNotification |
pethMainPowerUsageOffNotification
no

Displaying PoE configuration

You can display the status for the PoE configuration on the Ethernet Routing Switch 3500–
PWR+ using ACLI.

Displaying the current PoE configuration

Display the current PoE configuration of the Ethernet Routing Switch 3500–PWR+, and
settings for each PoE port.
Getting Started
[no] snmp-server notification-control
{pethPsePortOnOffNotification |
pethMainPowerUsageOnNotification |
pethMainPowerUsageOffNotification}
Variable Value
Specifies a notification type
Disables the traps for the PoE function
Displaying PoE configuration
March 2013 81