Configuring Daylight Savings Time Using Edm - Avaya 3500 series Getting Started

Configuring the switch using EDM
Time Zone tab field descriptions
The following table describes the fields on the Time Zone tab.
Name
TimeZone
TimeZoneAcronym

Configuring daylight savings time using EDM

Use this procedure to configure the start and end of the daylight savings time period.
Before you begin
Disable the summer time recurring feature.
Procedure
1. In the navigation tree, click Edit.
2. In the Edit tree, click SNTP/Clock.
3. In the work area, click the Daylight Saving Time tab.
4. In the Offset dialog box, type a value.
5. In the TimeZoneAcronymdialog box, type the time zone acronym.
6. In the StartYear dialog box, type a value.
7. In the StartMonth box, select a month.
8. In the StartDay dialog box, type a value.
9. In the StartHour box, select an hour.
10. In the StartMinutes dialog box, type a value.
11. Click Enabled to enable daylight savings time.
12. Click Apply.
13. In the EndYear dialog box, type a value.
14. In the EndMonth box, select a month.
15. In the EndDay dialog box, type a value.
110 Getting Started
Description
Specifies the time zone of the switch,
measured as an offset in 15–minute
increments from Greenwich Mean Time
(GMT).
Specifies the time zone acronym.
Comments? infodev@avaya.com
March 2013