Avaya 3500 series Getting Started page 111

16. In the EndHour box, select an hour.
17. In the EndMinutes dialog box, type a value.
18. Perform one of the following:
19. Click Apply.
Daylight Saving Time tab field descriptions
The following table describes the fields on the Daylight Saving TIme tab.
Name
Offset
TimeZoneAcronym
StartYear
StartMonth
StartDay
StartHour
StartMinutes
EndYear
EndMonth
EndDay
Getting Started
• Select the Enabled check box to enable daylight savings time for the switch.
• Clear the Enabled check box to disable daylight savings time for the switch.
Configuring daylight savings time using EDM
Description
Specifies the time in minutes by which you
want to change the time when daylight
savings begins and ends. The offset is added
to the current time when daylight savings
time begins and subtracted from the current
time when daylight savings time ends.
Specifies a time zone acronym.
Specifies the year when you want to start the
daylight savings time.
Specifies the month of each year when you
want to start the daylight savings time.
Specifies the day of the particular month
when you want to start the daylight savings
time.
Specifies the hour of the particular day when
you want to start the daylight saving time.
Specifies the minutes of the particular hour
when you want to start the daylight savings
time.
Specifies the year when you want to end the
daylight savings time.
Specifies the month of each year when you
want to end daylight savings time.
Specifies the day of the particular month
when you want to end daylight savings
time.
March 2013 111