Displaying Poe Power Mode Using Acli - Avaya 3500 series Getting Started

Managing Power Over Ethernet (PoE)
AC Power Status
DC Power Status
Variable definitions
The following table describes the parameters for the poe power-mode command.
low-power-budget | high-power-budget
default

Displaying Poe power mode using ACLI

Use the following procedure to display the poe operating mode. There are 2 power modes;
low (Fanless) or high (Normal).
The default is: high power mode (Normal mode).
Procedure
1. Log on to ACLI in Global Configuration command mode.
2. At the command prompt, enter the following command:
Example
The following figure provides a sample of the show poe poe-main-status command.
PoE Main Status - Stand-alone
--------------------------------------------------
Power Mode
Available DTE Power
DTE Power Status
DTE Power Consumption
DTE Power Usage Threshold
PD Detect Type
Power Source Present
AC Power Status
DC Power Status
86 Getting Started
Variable
show poe poe-main-status
Comments? infodev@avaya.com
: Present
: Not Present
Specifies the power mode:
• low-power-budget — for fanless mode
• high-power-budget — for normal mode
DEFAULT — high-power-budget (normal
mode)
Resets the power mode to the default value
— normal mode (high-power-budget)
: Low Power Budget
: 60 Watts
: Normal
: 0 Watts
: 80 %
: 802.3at and Legacy
: AC Only
: Present
: Not Present
Value
March 2013