Configuring the switch using EDM
Name
EndHour
EndMinutes
Enabled
Configuring recurring daylight saving time using EDM
Use this procedure to configure the daylight saving time start and end times for a single
occurrence or to recur yearly.
Procedure
1. In the navigation tree, click Edit.
2. In the Edit tree, click SNTP/Clock.
3. In the work area, click the SummerTimeRecurring tab.
4. Perform one of the following:
5. In the RecurringStartMonth section, click a radio button.
6. In the RecurringStartWeek dialog box, type a value.
7. In the RecurringStartDay section, click a radio button.
8. In the RecurringStartHour dialog box, type a value.
9. In the RecurringStartMinute dialog box, type a value.
10. In the RecurringEndMonth section, click a radio button.
11. In the RecurringEndWeek dialog box, type a value.
12. In the RecurringEndDay section, click a radio button.
13. In the RecurringEndHour dialog box, type a value
112
Getting Started
• Select the Recurring check box to enable recurring daylight savings time for
the switch OR
• Clear the Recurring check box to disable recurring daylight savings time for
the switch.
Comments? infodev@avaya.com
Description
Specifies the hour of the particular day when
you want to end daylight savings time.
Specifies the minute of the particular hour
when you want to end daylight savings
time.
Enables or disables daylight savings time.
Important:
Before you enable daylight savings time,
configure the feature attributes.
March 2013