Configuring the switch using ACLI
Procedure
1. Log on to ACLI in Global Configuration command mode.
2. At the command prompt, enter the following command:
Variable definitions
The following table describes the parameters for the ip name-server command.
<A.B.C.D>
no
Setting the systems DNS domain name
Specifies the DNS domain name for the Avaya Ethernet Routing 3500 Series switch.
Procedure
1. Log on to ACLI in Global Configuration command mode.
2. At the command prompt, enter the following command:
Variable definitions
The following table describes the parameters for the ip domain-namecommand.
<LINE>
no
46
Getting Started
[no] ip name-server <A.B.C.D>
Variable
[no] [default] ip domain-name [<LINE>]
Variable
Comments? infodev@avaya.com
Value
Specifies the IP address of a DNS server to
be added or removed in the format
XXX.XXX.XXX.XXX.
DEFAULT: 0.0.0.0
Removes the specified DNS server name.
Value
Specifies the system's DNS domain name.
DEFAULT: empty string
Clears the system's DNS domain name (sets
it to an empty string).
March 2013