7.6.4.1.4
Stiffness menu
Set the media sticking force (media stiffness) to the media guide.
Setup items
Parameters
Stiff
Normal
Soft
-
7.6.4.1.5
Thickness menu
Set the media thickness.
Setup items
Parameters
Thickness
50µm - 1500µm
Default: 100 µm
Notes
B
IDIRECTIONAL QUALITY CAN ONLY BE OBTAINED WHEN MEDIA THICKNESS IS SET CORRECTLY
7.6.4.1.6
Heater menu
Set the temperature of the Heater.
Setup items
Parameters
Heater
OFF – 50°C
Notes
•
T
HE DEFAULT SETTING FOR THE HEATER IS SET TO
Description
Setting for normal media
Setting for soft media where media feeding errors
and media jams occur
After setting, shift to the previous hierarchy menu.
Description
Change media thickness by operating the following keys.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value
Description
Change heater temperature by operating the following keys.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value
'50°C'.
104
User's Guide Blizzard
Chapter 7: Printer menu
AP-75260 – Rev. 2.1 – 15/01/08